Care & storage
Rinse a wetsuit according to its care label
Identify the suit and its care instructions before setting up a rinse routine, especially when different wetsuits share the same household.
Wavebutler / 24 articles
Care & storage
Rinsing, drying, inspection and storage between sessions and trips.
24 articles
Care & storage
Dry a wetsuit without hanging its weight from the shoulders
Support the wet suit over an appropriate broad support, and check the hanging arrangement before adding the garment's weight.
Care & storage
Store a wetsuit between trips without folding it tightly
Put a clean, fully dry suit away in a supported arrangement that follows its maker's guidance, with space around closures and delicate panels.
Care & storage
Read wetsuit cleaner instructions before use
Check compatibility, dilution and the complete wash sequence before using a cleaner, rather than treating a stronger mixture as a better clean.
Care & storage
Deal with a wetsuit zip that is becoming stiff
Stop forcing the closure, identify the type of zip and describe where it catches before choosing any cleaning or repair product.
Care & storage
Inspect wetsuit seams before the next trip
Inspect seams on a clean, dry suit in good light, looking for changes without stretching the garment to prove that a repair is needed.
Care & storage
Know when to ask a repairer about a wetsuit tear
Send the repairer the suit's model and clear views of the damaged area before buying an adhesive or attempting to close the tear yourself.
Care & storage
Dry surf boots where air can reach the inside
Arrange drying so the inside of each boot can be checked, while following the maker's limits on turning, support and heat.
Care & storage
Keep a changing robe ready for the next trip
Identify whether the robe is towelling, lined weatherproof clothing or another construction, then use its own care label rather than a generic robe routine.
Care & storage
Clean and dry a wet bag between uses
Empty the bag after every trip and clean the closure and lining according to its construction, rather than leaving yesterday's moisture sealed inside.
Care & storage
Remove old surf wax without damaging the board
Check the board's surface and maker guidance before choosing a wax-removal method, and keep heat, sharp tools and unknown solvents out of an improvised routine.
Care & storage
Inspect a board after an impact
Stop using the board if damage is uncertain, document the location and let an appropriate repairer assess anything you cannot confidently identify.
Care & storage
Why a damaged board needs assessment before another session
An unclear crack, opening or change in shape needs a decision before the next session; a small visible mark does not reveal the whole condition of a board.
Care & storage
Store a surfboard away from heat and pressure
Choose a stable, compatible support in a cool storage location, and check the surrounding space for heat, movement and concentrated contact points.
Care & storage
Rinse fin hardware and check it before storage
Identify the fin system and follow its cleaning instructions, keeping small components organised and checking visible wear before the board is stored.
Care & storage
Handle a fin screw that will not move
Stop when the tool slips or the fitting resists unexpectedly, then identify the system before seeking a compatible repair or replacement.
Care & storage
Dry a padded board bag before putting it away
Open the bag fully after travel, remove loose contents and inspect the padding and closure before storing it around a board.
Care & storage
Store a leash without tight knots or sharp bends
Let a cleaned leash dry in a relaxed arrangement, and keep storage separate from the inspection needed before using it again.
Care & storage
Check roof-rack pads and straps between trips
Lay out the carrying system between trips, identify worn or missing parts and resolve compatibility before it is needed on a vehicle again.
Care & storage
Create a small-space drying area for surf equipment
Design the drying area around drainage, permitted supports and airflow, with separate places for wet equipment and items ready to pack.
Care & storage
Build an equipment record with sizes and compatible parts
Keep enough information to identify the exact item and its compatible parts, without turning a simple equipment record into a complicated inventory project.
Care & storage
Photograph damage before asking a repairer for advice
Send a clear overall view and a few well-lit detail photographs, with factual notes that locate the issue and explain what happened.
Care & storage
Plan an end-of-season equipment inspection
Work through equipment in the order it will be cleaned, assessed, repaired and stored, leaving a short action list for anything that is not ready.
Care & storage
Prepare stored equipment before returning to the water
Bring equipment out early enough to inspect, resolve missing parts and confirm fit before the first booked session creates a deadline.
No matching articles. Try another term or clear your choices.